Go Kart Frame w/Steering
Hoop This sturdy, double tube construction,
high quality unit is jig-welded and made of 1" x .083" wall
tubing. Complete with steering hoop assembly, belly pan, engine mounting
plate, spindle brackets, steering shaft bushing, pedal bushings,
live-axle bearing hangers and control rod anchors. No additional welding
needed. Well designed and rugged. Dimensions are:
Frame Wheelbase: 41" from the front spindle bracket to the rear
axle opening
Frame Width: 21 3/4" across the back of the frame
Frame Overall length: 48" from the front of the frame to the
back of the frame
Frame Height: 5-5/8" from the top of the frame in the back to the
bottom of the frame
Front Axle Width: 26" from the end of the spindle bracket across
the frame to the end of the other spindle bracket
Kart Frame w/Steering Hoop
Part 3502
$129.00
Mini-Bike Frame & Fork
Kit Jig welded from high quality 7/8"
OD by .083 wall tubing, it is designed to accommodate up to and
including 17.5" OD mounted wheels. Complete with engine mounting
plate, front axle holes and rear mounting tabs. No additional welding is
required. Maximum engine height of 13-1/2". Wheelbase -
36". Handlebar Width - 21".
Description
Part Number
Price
Add To Cart
Minibike Frame & Fork Kit
3545
$99.95
Minibike Frame Only
3548
$72.25
Minibike Fork & Bolt Set
3546
$24.95
Minibike Kickstand
This kickstand can be used with the minibike frame
shown above. It comes with a weld on bracket and kickstand
w/spring. Approximately five inches tall.
Description
Part #
Price
Buy Now
Kickstand Kit, complete with Bracket
1727
$4.35
Kickstand with Spring, no bracket
1729
$2.90
Weld on Bracket for Kickstand
1728
$1.55
Frame Weldments
Universal applications for mounting
spindles, jackshafts, live axles, throttle & brake controls, pitman
arms and more. Weld in place. Priced and sold in pairs.
Description
Part Number
Price
Add To Cart
Two 1"
live axle bearing hangers for 2 or 3 hole flangettes
8127-2
$5.00
Two king pin
brackets, 5/8" bore for mounting spindles
8171-2
$4.20
Two king pin
brackets, 1/2" bore for mounting spindles
8181-2
$4.20
Two
hardened
steel King pins, 5/8-18 x 3.75" for bracket
8445-2
$2.70
Two
jackshaft
bearing hangers, 1-3/8" ID
8128-2
$3.90
Two
Pitman
arms for 5/8" shaft, 5/16" bolt hole, 1-5/8" centers
8129-2
$2.10
Two rod
anchors for 1/4" brake and throttle rods, 1 3/8 x 3/4"
8182-2
$0.70
Folding Foot Pegs, Pair Sturdy rubber tread folding foot pegs.
With long mounting studs. Folds when not in use. Uses 10mm bolts.
Mount using 2 #8162 clamps.
Description
Part Number
Price
Add To Cart
Folding Foot Pegs, Pair
1739
$6.50
Folding Foot Pegs, Pair, w/Clamps
2239
$11.25
Non-Slip Clamps, Set, 4 Halves
2209
$4.75
20 number set - 6" Two of each digit from 0 to 9. Full 6" high, meets latest
specs. Glossy black on white, self-adhesive.
