Go Kart & Minibike Parts Depot- Where you can find all the go kart and minibike parts you need: Choose from three different go kart kitsGo Kart & Minibike Parts Depot- Where you can find all the go kart and minibike parts you need: This go kart frame is used in our go kart kitsGo Kart & Minibike Parts Depot- Where you can find all the go kart and minibike parts you need: This minibike frame is used in our minibike kitsGo Kart & Minibike Parts Depot- Where you can find all the go kart and minibike parts you need: Choose from three different minibike kits
[ Home ] [ Up ] [ Turf Saver Tires ] [ Slicks ] [ Ribbed ] [ Sawtooth ] [ Studded, Knobby, & Universal ] [ Inner Tubes ]

 

Ribbed Tires

 

Ribbed Tires
For use on use on hard surfaces with a dirt layer.



*Click here for inner tubes 
go kart and minibike ribbed tiresgo kart and minibike ribbed tires
Tire Size Ply Width OD Use This Inner Tube* Tire Part Number Price Add To Cart
C-Carlisle     R-Round Profile
200 x 50 2 2.1" 7.5" 7143 7071-2 $6.50
10-300 x 4R 4 3.2" 10.0" 7128 7014 $11.00
11/400 x 5R 2 3.2" 10.5" 7131 7164 $12.25
11-400 x 5 8 3.2" 10.8" 7131 7046-8 $26.95
11-400 x 5 4 3.9" 10.5' 7131 7046 $18.25
13-400 x 6R 2 4.1" 13.0" 7133 7011-2 $11.25
13-400 x 6R 4 4.1" 13.0" 7133 7005 $14.00
13-500 x 6 2 4.8" 12.6" 7133 7168 $17.50
13-500 x 6 4 4.8" 12.6" 7133 7018 $17.75
13-650 x 6 4 6.0" 12.5" 7141 7031 $22.15
15-600 x 6 2 5.9" 14.8" 7125 7169 $23.85
15-600 x 6 4 5.9" 14.8" 7125 7050 $22.75
15-600 x 6C 4 6.0" 15.0" 7125 7088 $29.50
800 x 6 4 8.0" 16.0" 7138 7007 $54.95
14-300 x 8R 2 3.2" 14.0" 7123 7008-2 $11.75
410/350 x 8R 2 3.5" 15.3" 7123 7003-2 $9.00
480/400 x 8R 4 4.6" 16.3" 7121 7012 $14.00
16-650 x 8 2 6.4" 16.4" 7118 7024-2 $33.95
18-850 x 8 4 8.0" 16.5" 7120 7002 $50.50
18-950 x 8 4 8.0" 17.4" 7120 7027 $58.95

 

 

TIRE MOUNTING SAFETY AND PRECAUTIONS
NOTE:  FOLLOW INFLATION LIMIT BELOW EVEN IF PRESSURE MARKING ON TIRE IS GREATER.

1.  ALWAYS LUBRICATE THE TIRE BEADS AND WHEEL RIM WITH A SOAP SOLUTION OR OTHER APPROVED TIRE LUBRICANT.

2.  USE AN EXTENSION HOSE AND AN IN-LINE GAUGE WITH REGULATED AIR PRESSURE.

3.  WHILE INFLATING, USE SAFETY GLASSES AND SAFETY CAGE, OR OTHER RESTRAINING DEVICE.  STAND BACK, AND DO NOT EXPOSE ANY PART OF YOUR BODY TO THE WHEEL OR TIRE.

4.  NEVER PRY AGAINST ALUMINUM WHEEL RIM TO SEAT A TIRE.

5.  DO NOT EXCEED 25 PSI TO SEAT THE TIRE ON TWO PIECE WHEELS.  THEN IF STILL NOT SEATED, DEFLATE COMPLETELY, DISASSEMBLE, AND RE-LUBRICATE AS DISCUSSED ABOVE.