| NOTE: FOLLOW INFLATION LIMIT
BELOW EVEN IF PRESSURE MARKING ON TIRE IS GREATER.
1. ALWAYS LUBRICATE THE TIRE BEADS AND
WHEEL RIM WITH A SOAP SOLUTION OR OTHER APPROVED TIRE LUBRICANT.
2. USE AN EXTENSION HOSE AND AN IN-LINE
GAUGE WITH REGULATED AIR PRESSURE.
3. WHILE INFLATING, USE SAFETY GLASSES
AND SAFETY CAGE, OR OTHER RESTRAINING DEVICE. STAND BACK, AND DO
NOT EXPOSE ANY PART OF YOUR BODY TO THE WHEEL OR TIRE.
4. NEVER PRY AGAINST ALUMINUM WHEEL RIM
TO SEAT A TIRE.
5. DO NOT EXCEED 25 PSI TO SEAT THE TIRE
ON TWO PIECE WHEELS. THEN IF STILL NOT SEATED, DEFLATE COMPLETELY,
DISASSEMBLE, AND RE-LUBRICATE AS DISCUSSED ABOVE. |
